Club-306 Logo

How to remove an EGR Valve

DISCLAIMER: This information is provided "as is". The author and owner of club-306.com disclaim any loss or liability, either directly or indirectly as a consequence of applying the information presented herein, or in regard to the use and application of said information. No guarantee is given, either expressed or implied, in regard to the merchantability, accuracy or acceptability of the information.

Information contained within whis guide was kindly written by forum user Abergavenny_306.


Circled above in red is the general location of the Egr Valve


above pictured is the connector to the valve (arrowed green conector)

to find the valve is easy stand by the passanger wing look down the side to where the induction/airbox connects to the big black pipe that runs around the back of the intercooler

if you stand head on to your car look down the back of your battery and ull find it

make sure the engine is off and has time to cool before doing this (also must be off so that the egr is closed (disconecting it stops the power opening it)

prize the metal clip off and pull the connector down to disconect - leave at that -

  • improves pick up from low revs - very small improvement
  • improves engine noise (quietens it) bigest factor
  • improves smokeyness

Thanks to Jay for the pic

Join Club-306

Club-306 Membership Gives You More From Just £6 a Year...

Exclusive member discounts with top UK suppliers

Active friendly forum for members

UK-wide events, shows and meets

Peugeot 306 DIY Guides, tips & tricks


Forum Latest

Feedback Form